Kramer VS-42UHD, User Manual

Page: 55 / 71

50 VS-42UHD - Protocol 3000
13.3.1.12 HDCP-MOD
Functions Permission Transparency
Set: HDCP-MOD Administrator Public
Get:
HDCP-MOD?
End User Public
Description Syntax
Set: Set HDCP mode # HDCP-MOD SP inp_id,mode CR
Get: Get HDCP mode # HDCP-MOD? SP inp_id CR
Response
Set / Get:
~ nn @ HDCP-MOD SP inp_id,mode CR LF
Parameters
inp_id
– input number:
1
(HDMI In 1),
2
(HDMI In 2),
3
(HDMI In 3),
4
(HDMI In 4)
mode
– HDCP mode:
0
(HDCP Off),
3
(Mirror output – MAC mode)
Response Triggers
A response is sent to the com port from which the set (before execution) / get command was received
A response is sent to all com ports after command execution if
HDCP-MOD
was set by any other external
control device (device button, device menu or other) or if the HDCP mode changed
Notes
Set HDCP working mode on the device input:
HDCP not supported - HDCP Off
HDCP support changes following detected sink - MIRROR OUTPUT
K-Config Example
Disable HDCP mode on HDMI In 2:
“#HDCP-MOD 2,0”,0x0D