Connecting a VS-42HDMI 4x2 HDMI Matrix Switcher
9
6 Connecting a VS-42HDMI 4x2 HDMI Matrix Switcher
To connect the
VS-42HDMI
4x2 HDMI Matrix Switcher
, as illustrated in the
example in Figure 2, do the following
1
:
1. Connect
2
up to four HDMI sources (for example, DVD players) to the four IN
HDMI connectors.
2. Connect
3
the OUT 1 and OUT 2 HDMI connectors to up to two HDMI
acceptors (for example, LCD displays with built-in speakers).
3. If required, connect a PC and/or controller to the RS-232 port (see section 7.3)
and/or the ETHERNET port (see section 7.4).
4. Connect the power connector to the mains electricity (not shown in Figure 2).
5. If required, acquire the EDID (see section 7.1)
Press an INPUT SELECTOR button (two sets of buttons
4
from 1 to 4) to
choose which HDMI input to route to the outputs.
1 Switch OFF the power on each device before connecting it to your VS-42HDMI. After connecting your VS-42HDMI,
switch on its power and then switch on the power on each device
2 You do not have to connect all the HDMI sources
3 You do not have to connect both outputs
4 TO OUTPUT 1 and TO OUTPUT 2