Your VS-42HDMI 4x2 HDMI Matrix Switcher
7
Table 2: VS-42HDMI 4x2 HDMI Matrix Switcher Front Panel Features
#
Feature
Function
1
IR Receiver
The red LED lights when receiving signals from the
Infra-red remote control transmitter
2
POWER
Switch
Illuminated switch for turning the unit ON or OFF
3
TO OUTPUT 2
Press an INPUT SELECTOR button to select an input
(from 1 to 4) to switch to output 2
4
INPUT SELECTOR
Buttons
TO OUTPUT 1
Press an INPUT SELECTOR button to select an input
(from 1 to 4) to switch to output 1
5
TO OUTPUT 1
Press to toggle disconnecting output 1
6
OFF
Buttons
TO OUTPUT 2
Press to toggle disconnecting output 2
7
EDID
Button
1
Press to acquire the EDID
8
STO
Button
Press to store an input setting
9
RCL
Button
Press to recall an input setting
10
LOCK
Button
Press to toggle disengaging the front panel buttons and
to acquire the EDID (see section 7.1)
Table 3: VS-42HDMI 4x2 HDMI Matrix Switcher Rear Panel Features
#
Feature
Function
11
IN
HDMI Connectors
Connect to the HDMI sources (from 1 to 4)
12
OUT 1
HDMI Connector
Connect to the HDMI acceptor 1
13
OUT 2
HDMI Connector
Connect to the HDMI acceptor 2
14
RS-232
DB 9F Port
Connects to the PC or the RS-232 Remote Controller
15
ETHERNET
Connector
Connects to the PC or other Ethernet Controller
16
RESET
Button
Press the ETHERNET factory reset button to reset to the
factory default definitions
2
:
IP number 192.168.1.39
Mask – 255.255.255.0
Gateway – 192.168.1.1
17
Power Connector with Fuse
AC connector enabling power supply to the unit
1 Illuminates when configuring the EDID
2 First disconnect the power cord and then connect it again while pressing the RESET button. The unit will power up and load
its memory with the factory default definitions