![background image](http://html.mh-extra.com/html/kramer/vs-34fd/vs-34fd_user-manual_2001327010.webp)
Kramer Electronics Ltd.
VS-34FD
– Connecting VS-34FD
8
Connecting VS-34FD
Always switch OFF the power on each device before connecting it to your
VS-34FD
.
Figure 3: Connecting to the VS-34FD Rear Panel
For optimum range and performance use the recommended Kramer cables available at
www.kramerav.com/product/VS-34FD
Using third-party cables may cause damage!
The configuration of HDMI input/output cards shown in (
) is merely a sample
representation and different input / output cards may be mixed as required. For card
installation instructions, see
Input / Output Card Hardware Installation Instructions
To connect the
VS-34FD
as illustrated in the example in
1. Insert the input and output cards into the card slots
.
2. Connect 32 video sources (for example, a Blu-ray player and media player) and 2 video
acceptors, (for example, a video display and a projector), 2 video sources and 2 video
acceptors, or any configuration in between.
3. If required, connect a PC or remote controller to the RS-232 port (see
) and/or the Ethernet port (see
).
4. Connect the power cord.
5. If necessary, review and set the system configuration using the Menu (see
Using the
Configuration Menus
on page
24
).
29