![background image](http://html.mh-extra.com/html/kramer/vs-34fd/vs-34fd_user-manual_2001327008.webp)
Kramer Electronics Ltd.
VS-34FD
– Defining VS-34FD Modular Matrix Switcher
6
Figure 2: VS-34FD Modular Matrix Switcher Back Panel
#
Feature
Function
PS-2 Power Module and Switch
Connect to the mains power supply (for the PS-1 power module) and use
switch to power the unit.
PS-1 Power Module and Switch Connect to the mains power supply (for the PS-2 power Module) and use
switch to power the unit.
You can connect PS-1 and/or PS-2.
If one of them fails to operate, the other can power the unit.
48V DC Harness Connector
Connect to the
PS-4812
PoE power supply add-on.
RS-232 9-pin D-sub Port
Connect to the remote operation PC or a controller.
RESET Recessed Button
Press to reboot the
VS-34FD
control card.
NET 1 RJ-45 Connector
Connect to a PC or controller via the Ethernet LAN (100Mb).
NET 2-1G RJ-45 Connector
Connect to a PC or controller via the Ethernet LAN (100/1000Mb).
IN/OUT Connector Cards
(2x17)
Insert an input or output card and connect sources/acceptors to the HDMI™
and/or AUDIO 3.5mm mini jacks to create a flexible matrix switcher (ranging
from 2x32 to 32x2).
Different card types are available.
Each port in a card operates independently.
Card slots support hot-plug connection, so the device immediately
identifies a card as IN or OUT.
AUDIO 3.5mm mini jacks can be set as inputs or outputs (the output is
the HDMI audio embedded audio) when a source/acceptor is connected.
The port numbers are fixed. Each card has 2 ports and they are
numbered accordingly (for example, in the card located under 19-20, the top
port is 19 and the lower one is 20).
21 22
26
24
28
25
IN
IN
IN
IN
IN
IN
IN
IN
OUT
OUT
OUT
OUT
OUT
OUT
OUT
OUT
OUT
CTRL
27
23
48V
21
22
23
24
25
26
27
28