![background image](http://html.mh-extra.com/html/kramer/vs-3232dvi/vs-3232dvi_user-manual_2001323026.webp)
Using the Configuration Menus
23
23
8.2 Using the Config Menu
The Config Menu provides access to configuration settings that are not regularly
changed and comprises the following options:
•
Input signal detection (
Section 8.2.1
•
Output load detection (
)
Section 8.2.2
•
Interface configuration (
)
Section 8.2.3
•
Interface Reply configuration (
)
Section 8.2.4
•
Protocol configuration (
)
Section 8.2.5
•
Storing the default setup (
)
Section 8.2.6
•
Resetting the
VS-3232DVI
(
)
Section 8.2.7
•
Firmware revision display (
)
Section 8.2.8
To enter the Config Menu press MENU twice. The MENU button lights and the
following message is displayed:
)
Start configuration menu
MENU to view setups ENT to change them
When browsing through the configuration menu, enabled buttons light or flash.
Use the Config Menu as follows:
1. Press the MENU button to cycle through the menu items
1
2. Press the ENT button to enter a submenu.
.
3. After entering a submenu, you can select between several options.
Select an option by pressing one of the illuminated buttons in the Selector
Buttons area.
4. After selecting the desired option, a description of the desired change is
displayed and the TAKE button flashes.
5. Press the flashing TAKE button to confirm the change.
A description of the current state is displayed for about one second. The unit
automatically switches to the next item in the menu.
8.2.1 Config Menu—Input Signal Detection Display
This option displays a list of inputs and indicates on which of them signals have
been detected.
To display a list of inputs and detected signals:
1. Press MENU twice.
The following message is displayed:
start configuration menu
MENU to view setup ENT to change them
1 The LCD display shows the current status of the selected menu item