![background image](http://html.mh-extra.com/html/kramer/vs-311hdmi/vs-311hdmi_user-manual_2002315010.webp)
Your VS-311HDMI Automatic HDMI / Audio Switcher
7
Table 2: VS-311HDMI Automatic HDMI / Audio Switcher Features
#
Feature
Function
1
IR Receiver
The red LED lights when receiving signals from the
Infra-red remote control transmitter
2
POWER
Switch
Illuminated switch for turning the unit ON or OFF
3
INPUT SELECT
Buttons
Press the INPUT button to select the input to switch to the
output (from 1 to 3)
4
BALANCED OUT
Terminal Block Connector
Connect the balanced stereo audio output to a balanced
stereo audio acceptor
5
OUT
3.5mm Mini Jack Connect to an unbalanced stereo audio output
6
LINE
IN
3.5mm Mini Jack
Connect to the unbalanced stereo audio inputs (from 1 to 3)
7
OUT
RCA Connector
Connect to a digital audio (S/PDIF) output
8
A
U
D
IO
S/PDIF
IN
RCA
Connectors
Connect to the digital audio (S/PDIF) inputs (from 1 to 3)
9
RS-232
DB 9F Port
Connect to the PC or the Remote Controller
10
PRIORITY SETUP
Dipswitches
Dipswitches for setup of the machine: DIPs 1, 2 and 3 are for
setting the signal priorities; DIP 4 is for setting to the manual
or the AUTO mode (see section 5.1)
11
REMOTE
Terminal Block
Connects to a dry contact switch (see section 5.2)
12
OUT
HDMI Connector
Connect to the HDMI acceptor
13
IN
HDMI Connectors
Connect to the HDMI sources (from 1 to 3)
14
ETHERNET
Connector
Connect to the PC or other Serial Controller through computer
networking
15
FACTORY RESET
Button
Press the ETHERNET factory reset button to reset to the
factory default definitions
1
:
IP number 192.168.1.39
Mask – 255.255.255.0
Gateway – 192.168.1.1
16
12V DC
+12V DC connector for powering the unit
1 First, disconnect the power and then connect it again while pressing the RESET button. The unit will power up and load its
memory with the factory default definitions