Overview
3
3 Overview
The Kramer
VS-311HDMI
is a high performance 3x1 HDCP (high definition
digital content protection) compatible
1
automatic switcher for HDMI signals,
digital audio (S/PDIF) signals, and stereo audio signals.
The
VS-311HDMI
switches any one of three HDMI HDCP compliant
1
sources to a single display device, on HDMI connectors with the
corresponding:
Digital audio (S/PDIF) input signals switched to an S/PDIF output, on
RCA connectors
and
/
or
Unbalanced stereo audio input signals on 3.5 mini-jack connectors
switched to an unbalanced stereo audio output on a 3.5 mini-jack
connector, as well as to a balanced stereo audio output on a 5-pin terminal
block connector
The
VS-311HDMI
can operate either in the manual mode or in the auto mode.
In the manual mode, the
VS-311HDMI
acts as a regular switcher, switching
the input video and audio signals to the output via the three front panel
INPUT SELECT buttons.
In the auto mode, you can switch any input to the output via the three front
panel INPUT SELECT buttons, but once the selected video signal is lost, the
machine automatically switches to the highest priority input, according to the
input priority setup
2
. The
VS-311HDMI
will switch back to the primary input
when an HDMI signal is detected on that input.
The
VS-311HDMI
is housed in a desktop-sized enclosure and is 12 VDC fed.
Control the
VS-311HDMI
using the front panel buttons, or remotely via:
RS-232 serial commands transmitted by a touch screen system, PC, or
other serial controller
The Kramer infra-red remote control transmitter
The ETHERNET
Remote control contact closure
1 HDCP is a standard, developed by Intel, to protect copyright holders (movie studios, and so on) from having their programs
copied and shared. The HDCP standard provides for the secure, encrypted transmission of digital signals over HDMI or DVI
connections between two HDCP-enabled devices. The source device (such as a DVD player or HDTV tuner) encrypts the
digital signal using the HDCP standard, and then sends that signal over the HDMI or DVI connection to the receiving device
(for example, an HDTV). The receiving device decodes the signal using HDCP and uses the signal as it is allowed
2 As described in section 5.1