![background image](http://html.mh-extra.com/html/kramer/vs-311hdmi/vs-311hdmi_user-manual_2002315011.webp)
Connecting the VS-311HDMI Automatic HDMI / Audio Switcher
KRAMER: SIMPLE CREATIVE TECHNOLOGY
8
5 Connecting the VS-311HDMI Automatic HDMI / Audio
Switcher
To connect
1
the
VS-311HDMI
Automatic HDMI / Audio Switcher
, as
illustrated in the example in Figure 2, do the following
2
:
1. Connect an HDMI source (for example, an HDMI DVD player
3
) to the IN 1
HDMI connector and connect the digital audio input
4
to the IN 1 S/PDIF RCA
connector.
2. Connect an HDMI source (for example, an HDMI set top box source) to the
IN 3 HDMI connector and connect the digital audio input
5
to the IN 3 3.5
mini-jack connector.
3. Connect the OUT HDMI connector to the HDMI acceptor (for example, an
HDMI plasma display).
4. Connect the AUDIO OUT S/PDIF RCA connector
6
and the AUDIO OUT 3.5
mini-jack connector to a digital audio acceptor (for example, an AV receiver).
5. Set the PRIORITY SETUP dipswitches (see section 5.1)
6. If required, connect a PC and/or controller to the RS-232 port (see section 5.3)
and/or the ETHERNET port (see section 5.4).
7. If required, connect
7
the contact closure remote control PINs (see section
5.2).
8. Connect the 12V DC power adapter to the power socket and connect the
adapter to the mains electricity (not shown in Figure 2).
1 You do not need to connect all the inputs
2 Switch OFF the power on each device before connecting it to your VS-311HDMI. After connecting your VS-311HDMI,
switch on its power and then switch on the power on each device
3 You can also connect a DVD player with a DVD connector, using an DVI-HDMI adapter to transfer video signals
4 Alternatively you can connect it to the 3.5 mini-jack connector
5 Alternatively you can connect it to the S/PDIF RCA connector
6 If the inputs are connected only to the 3.5 mini-jack connectors, connect the AUDIO OUT 3.5 mini-jack connector and/or
the BALANCED OUT
terminal block connector only
7 The connection is not illustrated in Figure 2