KRAMER: SIMPLE CREATIVE TECHNOLOGY
Acquiring EDID
8
6 Acquiring EDID
Initially, the
VS-21HDCP-IR
operates with the factory default EDID
1
To acquire the EDID, do the following:
. This
lets you connect the power before connecting one of the acceptors or the
source. You can acquire the EDID from the output to one of the two inputs, or
set the acquired EDID and the default EDID to both inputs.
1. Connect the power.
2. Connect the output.
3. Press and hold the SELECT button.
The IN LEDs illuminate in the following cycle: IN 1 blinks, IN 2 blinks,
both illuminate and both blink (default).
4. Release the SELECT button when reaching the desired set up.
The EDID is now acquired:
IN LEDs
The EDID Acquired when releasing the SELECT button
IN 1 blinks
Output to input 1
IN 2 blinks
Output to input 2
IN 1 and IN 2 illuminate
Output to Input 1 and input 2 simultaneously
IN 1 IN 2 blink
Default value to Input 1 and input 2 simultaneously
7 Technical Specifications
Table 2
includes the technical specifications:
Table 2: Technical Specifications
2
INPUTS:
of the VS-21HDCP-IR 2x1 DVI Switcher
2 DVI
3
OUTPUT:
, 1.2Vpp on a DVI Molex 24-pin female connector; DDC signal
5Vpp (TTL)
1 DVI
3
, 1.2Vpp on DVI Molex 24pin female connectors; DDC signal
5Vpp (TTL)
BANDWIDTH:
2.25Gbps per graphic channel
POWER SOURCE:
5V DC, 210mA
OPERATING TEMPERATURE: 0° to +55°C (32° to 131°F)
STORAGE TEMPERATURE:
-45° to +72°C (-49° to 162°F)
HUMIDITY:
10% to 90%, RHL non-condensing
DIMENSIONS:
14.3cm x 12.2cm x 4.36cm (5.63" x 4.8" x 1.72", W, D, H)
WEIGHT:
0.3kg (0.67lbs) approx.
ACCESSORIES:
Power supply, infrared remote controller, bracket installation kit
OPTIONS:
Kramer DVI cables
1
1 The VS-21HDCP-IR reads the EDID, which is stored in the non-volatile memory
2 Specifications are subject to change without notice
3 On a DVI-I connector. Note that only the digital signal (DVI-D) is available on the DVI connector
