![background image](http://html1.mh-extra.com/html/kramer/vs-161hdmi/vs-161hdmi_user-manual_2002281015.webp)
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Operating the VS-161HDMI
12
4. Toggle between the PC mode (input button not illuminated) and the DVD
mode (input button illuminated) by pressing that input.
5. Press the PANEL LOCK button to exit this mode.
6. You can connect a computer to the input(s) that is set to the PC mode and a
DVD to the input(s) that is set to the DVD mode.
Table 4 summarizes the differences between the PC mode and the DVD
mode:
Table 4: DVD Mode and PC Mode Characteristics
PC Mode
DVD Mode
The input is connected to a computer
The input is connected to a multimedia application,
such as a DVD, a set top box and so on
The EDID is available at all times (to prevent
computer reset)
The EDID is available only when that input is
connected to an output
The input EDID source is the default EDID
or an acquired EDID (see section 7.2)
The input EDID source is acquired directly from the
connected output
7.2 Acquiring the EDID
The acquired EDID is used when an input is set to the PC mode.
To acquire the EDID, do the following:
1. Turn the POWER off.
2. Press the PANEL LOCK button and the INPUT 16 button while turning the
POWER on again.
The INPUT buttons blink in sequence until the unit has completed to read the
EDID.
3. Release the PANEL LOCK and INPUT 16 buttons.
If an output was connected, the output EDID is read to all the inputs. If an
output was not connected to the machine, the default EDID is read to the
inputs.