![background image](http://html.mh-extra.com/html/kramer/vs-1616d/vs-1616d_user-manual_2001297059.webp)
52
VS-1616D - Using the Input / Output Cards
9.2.1
DGKat-IN2-F16 / DGKat-OUT2-F16 Configuration
The
DGKat-IN2-F16
configuration table appears as follows:
DGKat-IN2-F16 Input Card
Parameter
Description
Default
HDCP
Turn HDCP on and off.
*0=EN, 1=DIS.
0
The
DGKat-OUT2-F16
configuration table appears as follows:
DGKat-OUT2-F16 Output Card
Parameter
Description
Default
HDMI
Sets the output signal format (Display, HDMI, DVI).
Display—the output is set automatically based on the EDID of the
connected display.
DVI—Force the output to be DVI.
HDMI—Force the output to be HDMI.
Note
: When selecting the DVI option and fast switching is enabled,
you must ensure that the source is DVI compatible.
Display
Deep Color
Sets maximum color bit depth (Auto, 8 bit).
Auto—Set the color depth automatically.
8 bit—Limit the color depth to 8 bits.
Note
: Deep color on DGKat is not supported at higher resolutions
(1080p @50/60Hz or WUXGA). When setting deep color to on,
ensure that the resolution does not exceed the DGKat maximum
data rate of 4.95Gbps (1.65Gbps per graphic channel).
Auto
Switch Speed
When switching between different sources the switching time can be
reduced by setting the fast switch level (Ex-fast Switch, Fast Switch
or Normal Switch).
Normal
Switch
9.2.2
DGKat-IN2-F16 / DGKat-OUT2-F16 Technical Specifications
DGKat cards must be used with twisted pair cables with RJ-45
connections, such as the Kramer
BC-UNIKat
. DGKat cards support
Deep Color only at resolutions of 720p and lower.
The following table defines the technical specifications.
PORTS:
2 TP DGKat ports on RJ-45
2 Serial ports on 3-pin terminal blocks
BANDWIDTH PER CHANNEL:
Video: 1.65Gbps
Serial Data: 19200
TOTAL BANDWIDTH:
Video: 4.95Gbps
Serial Data: 19200
MAXIMUM RANGE:
90m (300ft) – 1080p @60Hz when using BC-UINIKat cable
3D PASS THROUGH:
Supported
POWER CONSUMPTION:
Input card: 12W
Output card: 10W
OPERATING TEMPERATURE:
0° to +40°C (32° to 104°F)