Operating the VP-8x8TP 8x8 UXGA/Audio Matrix Switcher
21
7.4.2 Recalling an Input-Output Configuration
To recall an input-output configuration:
1. Press the RCL button.
The RCL button blinks.
2. Press the appropriate INPUT/OUTPUT button (the button # corresponding to
the setup #). If in the Confirm mode, that setup configuration flashes in the
Status display together with the RCL button and the TAKE button, and is only
be implemented after pressing the TAKE button.
The memory recalls the stored data from that reference.
Tip
: If you cannot remember which of the 16-input-output configurations is the
one that you want, set the
VP-8x8TP
to the Confirm mode and manually scan
7.5
Locking the Front Panel
all
the input/output configurations until you locate it.
To prevent changing the settings accidentally or tampering with the unit via the
front panel buttons, lock
To lock the VP-8x8TP:
your
VP-8x8TP
. Unlocking releases the protection
mechanism.
•
Press and hold the LOCK button for more than two seconds until the LOCK
button is lit.
The front panel is locked. Pressing a button has no effect other than to cause
the LOCK button to flash
To unlock the VP-8x8TP:
•
Press and hold the lit LOCK button for more than two seconds, until the
LOCK button is no longer lit
The front panel is unlocked
7.6
Choosing the Audio-Follow-Video or Breakaway Option
You can switch stereo audio signals in one of two ways, either:
•
Audio-follow-video (AFV), in which all operations relate to both the video
and the audio channels
•
Breakaway, in which video and audio channels switch independently
1 By pressing the RCL button followed by the INPUT/OUTPUT buttons
2 Even when the front panel is locked you can still operate via RS-232 or RS-485, as well as via the Kramer RC-IR3 infrared remote
control transmitter
3 Warning that you need to unlock to regain control via the front panel
