VP-774AMP
–
Overview
5
Scaled Outputs
– 2 HDMI outputs, an SDI output and an HDBaseT TP
output simultaneously
HDBaseT™ technology with a bandwidth of up to 6.75Gbps (2.25Gbps per
graphic channel)
System Range - Up to 130m (430ft) normal mode; up to 180m (590ft) ultra-
mode (1080p @60Hz @24bpp) when using
BC−HDKat6a
cables
For optimum range and performance using HDBaseT™, use Kramer's
BC−HDKat6a
cable. Note that the transmission range depends on
the signal resolution, source and display used. The distance using
non−Kramer CAT 6 cable may not reach these ranges.
Output Resolutions
– HDTV and Computer Graphics up to 2k and
1080p/UXGA with selectable refresh rates
Multiple Aspect Ratio Selections
– Follow input, follow output, best fit, letterbox
Multi-Standard SDI support - SDI (SMPTE 259M), HD-SDI (SMPTE 292M)
and 3G HD-SDI (SMPTE 424M)
Looping 3G HD-SDI Input
SDI channeling, letting you select one active audio signal and three
bypassed signals from eight embedded stereo audio channels
Multi-Standard Video support - NTSC (3.58/4.43), PAL (M/N/60) and SECAM
Built-in Time Base Corrector - Stabilizes unstable video sources
Built-in Proc-Amp with enhanced functions such as color correction, gamma
and dither
Input and output audio level adjustment
Balanced stereo audio inputs, with two unbalanced microphone inputs, as
well as digital stereo and balanced stereo outputs
Selectable Microphone talkover or mix modes
A built-in 2x10W power amplifier with speaker outputs on a 4-pin terminal
block connector
Automatic detection and selection of the HDMI and DP embedded audio.
The
VP-774AMP
automatically outputs the signal from the HDMI and DP
embedded audio inputs or performs an analog takeover to output the
respective analog audio input
i
Summary of Contents for VP-774A
Page 2: ......
Page 3: ......
Page 68: ...62 VP 774AMP Using the Embedded Web Pages Figure 44 The Routing Scaling Page PIP Window...
Page 121: ......