Kramer VP-774A, User Manual

Page: 70 / 122

64 VP-774AMP - Using the Embedded Web Pages
9.1.2 Swapping Inputs
Press the Swap Inputs button to swap between MAIN and PIP inputs. For
example, if the MAIN window displays input 3 and the PIP window displays input 1,
these inputs swap places when clicking the Swap Inputs button, so the MAIN
window will now show HDMI 1 and the PIP window will show HDMI 3
Figure 46: The Routing & Scaling Page
– The Swap Inputs
Figure 47: The Routing & Scaling Page
– Swapping the Inputs
9.1.3 Auto Switching
Click the Auto Switching button to open the Auto Switching window (see Figure 48 ).
The Auto Switching window lets you set the Main and PiP scanning mode
separately to:

Off to disable scanning

Scan mode to scan through the inputs in search of a valid input signal.
In the scan mode you can select which of the inputs will be included in the
scan (see Figure 49 ) and also change the order of the scanned inputs (see
Figure 50 )

Last Connected mode to immediately switch to the latest valid input signal
connected (for HDMI and DP inputs only)
Note that in case the last connected valid input signal is disconnected, the
VP-774AMP will switch to the previous last-connected valid-input signal, and
then to the input before that and so on until the last disconnected inputs, and
then a “No Signal” screen will appear