![background image](http://html1.mh-extra.com/html/kramer/vp-774a/vp-774a_user-manual_2002262107.webp)
VP-774AMP - The VP-774AMP RS-232 Communication Protocol
101
101
13.2.1
Using the Communication Protocol with Protocol 3000 (the “Y”
Command)
Set
Command
:
Type in: “Y Control_Type=0,Function,Param”
Reply: “~id=01Y Control_Type=0,Function,Param OK”
Set command example, set window control (721) to PiP:
Send: “#y 0,721,1”
Reply: “~01@Y 0,721,1 OK”
Get Command:
Type in: “Y Control_Type=1,Function”
Result: “~id=01Y Control_Type=1,Function,Param”
Get command example: get window control setup (721):
Send: “#y 1,721”
Result: “~01@y 1,721,1”
You can add a
last parameter
, to be located fourth in SET or third
in GET, to define a specific window.
For example:
Set H Sharpness value to 10 on the PiP window (
1
): “#y 0,510,10,
1
”
Get H sharpness of the Main window (
0
): “#y 1,510,
0
”
The “Y” command also supports the value increment/decrement of any command
using the ‘+’ or ‘-‘ signs as the third parameter of the “Y” command.
For example, move the PiP window one step to the left
Send: “#Y 0,141,-,1<CR>”
Reply: “~01@Y 0,141,-,1 OK”
For example, in order to increase zoom on the main window
Send: “#Y 0,650,+,0<CR>”
Reply: “~01@Y 0,650,+,0 OK”
i
Summary of Contents for VP-774A
Page 2: ......
Page 3: ......
Page 68: ...62 VP 774AMP Using the Embedded Web Pages Figure 44 The Routing Scaling Page PIP Window...
Page 121: ......