22
VP-773 - The OSD Menu
The display mode setup, shown in
Figure 9
, is part of the entire system control and
the selected Single Window also shows the current aspect ratio (Best Fit):
Figure 9: Select the Display Mode
6.2.1
Window Customization
Window customization lets you change the size and position of a selected window.
Make sure that you have control over the window that requires customization (Main
Window Control or PiP Window Control). If not, select it via the OSD item in the
Miscellaneous menu, see
Section
6.8.
In the following examples, PiP Window Control is selected, but the same procedure
applies to Main Window Control.
Note that you can also customize the window size and position via the
“Y” commands (see
Section
12.2) or protocol 3000 (see
Section
12.4).
6.2.1.1 Changing the Size of the Main and/or PiP Window
Use the H Width and V Height to change the size of the window using the + and
–
buttons on the front panel or remote control transmitter (as illustrated in
Figure 10
).
i
Summary of Contents for VP-773
Page 2: ......
Page 3: ......
Page 19: ...14 VP 773 Connecting the VP 773 Figure 4 Connecting the VP 773 Presentation Switcher Scaler...
Page 79: ......
