![background image](http://html1.mh-extra.com/html/kramer/vp-727/vp-727_user-manual_2001260016.webp)
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the VP-727
12
To connect
1
the
VP-727
, do the following
2
:
1. Connect the following video sources
1
(see Figure 4):
An RGBHV (high resolution) computer graphics source to the R/PR,
G/Y/CV, B/PB/C, HS/CS and VS BNC INPUT 1 connectors
An RGB camera to both the R/PR, G/Y/CV, and B/PB/C BNC INPUT
2 and INPUT 8 connectors
A composite video player to the G/Y/CV BNC INPUT 3 connector
An s-Video player to the G/Y/CV and B/PB/C BNC INPUT 4 connectors
A component source—for example, a Betacam video player—to the
R/PR, G/Y/CV, and B/PB/C BNC INPUT 5 connectors
An HDTV satellite receiver source to the R/PR, G/Y/CV, and B/PB/C
BNC INPUT 6 connectors
An RGBS (separate composite sync) computer graphics source to the
R/PR, G/Y/CV, B/PB/C, and HS/CS BNC INPUT 7 connectors
Figure 4: Connecting the INPUTS (an example)
1 As this particular example describes. As the VP-727 is universal, you can connect any type (format) of video to the inputs
2 Switch OFF the power on each device before connecting it to your VP-727. After connecting your VP-727, switch on its
power and then switch on the power on each device