14
VP-725NA - Connecting the VP-725NA Presentation Switcher/Scaler
5
Connecting the VP-725NA Presentation
Switcher/Scaler
This section describes how to connect the
VP-725NA
. In particular, how to
connect the:
•
VP-725NA
rear panel (see
Section 5.1
)
•
Interlaced and progressive RGBS and RGsB inputs (see
Section 5.2
)
•
PC (see
Section 5.3
)
•
Ethernet port (see
Section 5.4
)
•
Audio inputs/outputs (see
Section 5.5
)
Using the
VP-725NA
you can select any one of the 21 inputs and scale that input
to up to three scaled outputs (at the identical resolution).
5.1
Connecting the VP-725NA
To connect the
VP-725NA
, connect the following to the rear panel, as the example
in
Figure 3
illustrates:
Always switch off the power to each device before connecting it to your
VP-725NA
. After connecting your
VP-725NA
, connect its power and
then switch on the power to each device.
1. Connect one or more of the following video sources:
Up to four UXGA graphics sources (for example, computers) to the
15-pin HD input connectors
These connectors also accept interlaced and progressive RGBS and RGsB
signals (see
Section 5.2
)
Up to four composite video sources (for example, DVD players) to the
BNC input connectors
Up to four s-Video sources to the 4-pin input connectors (not illustrated
in
Figure 3
)
i
