VP-558
Quick Start
P/N: 2 9 0 0 - 3 0 0 8 6 2 QS
Rev: 3
Scan for full manual
VP-558 Quick Start Guide
This guide helps you
INSTALL
and use your
VP-558
for the first time.
www.kramerav.com/downloads/VP-558
to download the latest user manual and check if firmware
upgrades are available.
Step 1:
Check what’s in the box
VP-558
Presentation Switcher Scaler
1 Set of rack ears
1 Quick start guide
1 Power cord
4 Rubber feet
Step 2: Get to know your VP-558
#
Feature
Function
1
TO USB OUT Buttons
Press a button to switch a USB input to the output (USB 1
– USB 4).
2
OUT Buttons
Press a button to switch an input to up to 4 outputs.
3
IN Buttons
Press a button to switch an input to the output (HDMI inputs 1
– 6, HDBT inputs 1 – 4, and
PC In).
4
STO Button
Press to store a configuration.
5
RCL Button
Press to recall a configuration.
6
OSD OUT LEDs
Indicate where the OSD is displayed.
7
OSD SELECT Button
Press to select the output on which the OSD will be displayed (OUT 1
– OUT 4).
8
MENU Button
Press to display the OSD menu.
9
STATUS LCD Display
Displays the selected inputs switched to the outputs as well as front panel lock up
indication.
10
Navigation
Buttons
Press to decrease numerical values or select from several definitions.
When not in the OSD menu mode, press to reduce the output volume.
Press to move up the menu list values.
Press to increase numerical values or select from several definitions.
When not within the OSD menu mode, press to increase the output volume.
Press to move down the menu list.
ENTER
Press to accept changes and change the SETUP parameters.
11
RESET TO XGA/720p Button
Press and hold for about 2 seconds to reset to XGA.
Press and hold for about 5 seconds to reset to 720p.
12
PANEL LOCK Button
Press and hold for about 3 seconds to lock/unlock the front panel buttons.
