Kramer Electronics Ltd.
VP-551X
– Protocol 3000
54
Function
Description
Syntax
Parameters/Attributes
Example
HDCP-MOD?
Get HDCP mode.
Set HDCP working
mode on the device input:
HDCP supported -
HDCP_ON [default].
HDCP not supported -
HDCP OFF.
HDCP support changes
following detected sink -
MIRROR OUTPUT.
COMMAND
#HDCP-MOD?
inp_id
<CR>
FEEDBACK
~nn@HDCP-MOD
inp_id
,
mode
<CR><LF>
stage
– Input/Output
0
– Input
1
– Output
inp_id
– Input number:
1
– HDMI 1
2
– HDMI 2
3
– HDMI 3
4
– HDMI 4
5
– HDMI 5
6
– HDMI 6
7
– HDMI 7
8
– HDMI 8
Output number
1
– HDMI
2
– HDBT
mode
– HDCP mode
Input:
0
– Off
1
– On
Output:
2
– Follow input
3
– Follow output
Get the input HDCP-MODE of
input HDMI 1:
#HDCP-MOD?
0
,
1
<CR>
HELP
Get command list or help
for specific command.
COMMAND
#HELP
<CR>
#HELP
command_name
<CR>
FEEDBACK
1. Multi-line:
~nn@Device
command
,
command…
<CR><LF>
To get help for command use: HELP (COMMAND_NAME)
<CR><LF>
~nn@HELP
command:
<CR><LF>
description
<CR><LF>
USAGE:usage
<CR><LF>
command
– Name of a specific
command
Get the command list:
#HELP
<CR>
To get help for
AV-SW-TIMEOUT:
HELP
AV-SW-TIMEOUT
<CR>
IMAGE-PROP
Set the image size.
Sets the image
properties of the selected
scaler.
COMMAND
#IMAGE-PROP
scaler,status
<CR>
FEEDBACK
~nn@IMAGE-PROP
P1
,
P2…
<CR><LF>
scaler
– Scaler number – 1
status
– Status
0
– Over scan
1
– Full
2
– Best fit
3
– Pan scan
4
– Letter box
5
– Under 2
6
– Under 1
7
– Follow in
Set the image size to Full:
#IMAGE-PROP
1
,
1
<CR>
IMAGE-PROP?
Get the image size.
Gets the image
properties of the selected
scaler.
COMMAND
#IMAGE-PROP?
P1
,
…
,
P6
<CR>
FEEDBACK
~nn@IMAGE-PROP
P1
,
P2…
<CR><LF>
scaler
– Scaler number – 1
status
– Status
0
– Over scan
1
– Full
2
– Best fit
3
– Pan scan
4
– Letter box
5
– Under 2
6
– Under 1
7
– Follow in
Get the image size:
#IMAGE-PROP?
1
<CR>
LOCK-FP
Lock the front panel.
In NT-52N, this
command includes the
PortNumber (1-2)
parameter.
COMMAND
#LOCK-FP
Lock/Unlock
<CR>
FEEDBACK
~nn@LOCK-FP
Lock/Unlock
<CR><LF>
Lock/Unlock
– On/Off
0
– Off unlocks EDID
1
– On locks EDID
Unlock front panel:
#LOCK-FP
0
<CR>
LOCK-FP?
Get the front panel lock
state.
In NT-52N, this
command includes the
PortNumber (1-2)
parameter.
COMMAND
#LOCK-FP?
<CR>
FEEDBACK
~nn@LOCK-FP
Lock/Unlock
<CR><LF>
Lock/Unlock
– On/Off
0
– Off unlocks EDID
1
– On locks EDID
Get the front panel lock state:
#LOCK-FP?
<CR>
LOUDNESS
Set audio loudness.
COMMAND
#LOUDNESS
channel
,
loudness
<CR>
FEEDBACK
~nn@LOUDNESS
channel
,
loudness
<CR><LF>
channel
– 1
loudness
– On/Off
0
– Off
1
– On
Set audio loudness:
#LOUDNESS
1
,
1
<CR>
LOUDNESS?
Get audio loudness.
COMMAND
#LOUDNESS?
channel
<CR>
FEEDBACK
~nn@LOUDNESS
channel
,
loudness
<CR><LF>
channel
– 1
loudness
– On/Off
0
– Off
1
– On
Get audio loudness:
#LOUDNESS?
1
<CR>
MIC-GAIN
Set the microphone gain.
Sets the microphone
input audio gain.
COMMAND
#MIC-GAIN
P1
,
P2,P3
<CR>
FEEDBACK
~nn@MIC-GAIN
P1
,
P2
<CR><LF>
P1
– 0
P1
– Mic number
0
– Mic 1
1
– Mic 2
P3
– Level – 0 to 100
++ increase current value
– decrease current value
Set mic 1 gain to 35:
#MIC-GAIN
0
,
0
,
35
<CR>
MIC-GAIN?
Get the microphone gain.
Gets the microphone
input audio gain.
COMMAND
#MIC-GAIN?
P1
<CR>
FEEDBACK
~nn@MIC-GAIN
P1
,
P2
<CR><LF>
P1
– 0
P1
– Mic number
0
– Mic 1
1
– Mic 2
P3
– Level – 0 to 100
Get the mic 2 gain:
#MIC-GAIN?
0
,
1
<CR>
DRAFT
