P/N: 2900 - 0000401 A1
ADDENDUM: VP-501xl / VP-502xl
This addendum describes how to connect an HD source to the
VP-502xl
,
using a breakout VGA-to-RCA/BNC cable (for example, the Kramer
C-GM/3RVF cable):
The following is added at the end of section 5:
Connecting the VP-502xl
To connect your
VP-502xl
as the example in Figure A
1
illustrates, do the
following
1
:
1. Connect a high definition source
2
to the HD15F INPUT connector (for
example, a set top box).
Follow steps 2, 3 and 4 on page 5, and adjust the Scan Converter features, if
required (see section 6.3).
s-Video Recorder
Composite Video Recorder
Set Top Box
Source
PIN #
1
Pr
Y
Pb
2
3
Signal
INPUT Connector PINOUT
Figure A1: Connecting the VP-502xl
In addition, on page 11, this line is added to the end of Table 6:
OPTIONS:
19" rack adapters RK-T1, RK-T3 ; VGA to 3RCA breakout cable C-GM/3RVF
1 Switch OFF the power on each device before connecting it to your VP-502xl. After powering up your VP-502xl, switch on
the power on each device
2 To connect a high definition source, use a breakout cable such as the Kramer C-GM/3RVF. If you have a VGA to a 5BNC
cable, use the RGB wires only. For direct wiring, see the table in Figure A1