Your VGA/XGA Audio Matrix Switcher
KRAMER ELECTRONICS, LTD.
6
4.1.2
Connecting a Phoenix Terminal Block Cable
Connect a Phoenix terminal block cable connector to the RS-485 port on each
VP-4x4
unit in the series
1
, as Figure 3 illustrates.
Figure 3: VP-4x4 Connections
4.1.3
Dipswitch Settings
The
VP-4x4
includes a set of 4 dipswitches, as Figure 3 illustrates above.
You configure each
VP-4x4
unit by setting the dipswitches as follows:
Pull a dipswitch DOWN to set it to ON
Pull a dipswitch UP to set it to OFF
Set dipswitch 4 to ON for the first and last units only
2
(otherwise set
dipswitch 4 to OFF)
1 You can connect up to 8 units
2 Acts as a terminator