Operating Your Audio Matrix Switcher
11
Figure 5: SELECTOR Buttons
1
5.5.1
Storing an Input/Output Configuration
To store the current status in memory, do the following:
1. Press the STO button.
The STO button blinks.
2. Press one of the 8 SELECTOR buttons.
The memory stores the data at that reference.
5.5.2
Recalling an Input/Output Configuration
To recall an input/output configuration, do the following:
1. Press the RCL button.
The RCL button blinks.
2. Press the appropriate SELECTOR button.
The memory recalls the stored data from that reference.
If you cannot remember which of the 8 input/output configurations is the one
that you want, set the
VP-4x4
to the CONFIRM mode and manually scan all
the input/output configurations until you locate it.
5.5.3
Deleting an Input/Output Configuration
To delete an input/output configuration, do the following:
1. Press the STO and RCL buttons simultaneously.
Both the STO and RCL buttons blink.
2. Press the appropriate SELECTOR button.
This erases that specific input/output configuration from the memory,
leaving it empty and available
2
.
1 The gray numbers (1 to 8) in Figure 5 that illustrate the corresponding store/recall configuration number, are for the purpose
of illustration only and do not actually appear on the buttons
2 Storing a new configuration over a previous configuration (without deleting it first) replaces the previous configuration
