Kramer Electronics Ltd.
VP-440
– Using the Embedded Web Pages
32
Configuring Automatic Switching Settings
To configure automatic switching settings:
1. Click
Advanced
on the Navigation List.
The Advanced page appears.
Figure 29: The Advanced Page
2. Define Auto Sync Off:
▪
Disable
– disable the Auto Sync Off feature.
▪
Fast
– shuts down after about 10 seconds.
▪
Slow
– shuts down after about 2 minutes.
3. Define Auto Switching:
▪
Off
– Disable auto switching.
▪
Auto Scan
– Set auto-scanning and select from Scan Priority (below) which input to
begin the scanning.
▪
Last connected
– When detecting that a source is connected to an input (which
previously had no signal), automatically switch to that input.
4. Set Scan Priority to PC or HDMI (once the auto scan is enabled).
5. Set Time shift (on or off)
– Set to On to implement a small shift on the horizontal sync to
improve output picture stability. Set to OFF if the display shows an instability at the
selected output resolution.
6. Set Volume bar display
– enable or disable display of volume bar when output is
changed.