Kramer Electronics Ltd.
VP-440
– Operating the VP-440
14
Using the OSD Menu
The control buttons let you control the
VP-440
via the OSD menu. Press:
•
MENU
to enter the menu.
The default timeout is set to 10 seconds.
•
ENTER
to accept changes and to change the menu settings.
•
Arrow buttons to move through the OSD menu, which is displayed on the video output.
On the OSD menu, select EXIT to exit the menu.
OSD Menu
Menu
Mode
Function
OUTPUT
SOURCE
Select the input: HDMI 1, HDMI 2, HDMI 3, HDMI 4, PC1 or PC2.
SIZE
Select the image size: FULL, OVER SCAN, UNDER 1, UNDER 2, LETTER BOX,
PAN SCAN or BEST FIT.
RESOLUTION
Select the output resolution from the menu:
Output resolution:
Appears as:
Output resolution:
Appears as:
NATIVE OUT1
1600x900 @60Hz
1600x900 60
NATIVE OUT2
1600x1200 @60Hz
1600x1200 60
640x480 @60Hz
640x480 60
1920x1080 @60Hz
1920x1080 60
800x600 @60Hz
800x600 60
1920x1200 @60Hz
1920x1200 60
1024x768 @60Hz
1024x768 60
480p @60Hz
720x480P 60
1280x768 @60Hz
1280x768 60
720p @60Hz
1280x720P 60
1360x768 @60Hz
1360x768 60
1080i @60Hz
1920x1080I 60
1280x720 @60Hz
1280x720 60
1080p @60Hz
1920x1080P 60
1280x800 @60Hz
1280x800 60
576p @50Hz
720x576P 50
1280x1024 @60Hz
1280x1024 60
720p @50Hz
1280x720P 50
1440x900 @60Hz
1440x900 60
1080i @50Hz
1920x1080I 50
1400x1050 @60Hz
1400x1050 60
1080p @50Hz
1920x1080P 50
1680x1050 @60Hz
1680x1050 60
NATIVE
- Select NATIVE to select the output resolution from the EDID of the
connected HDMI monitor.
PICTURE
CONTRAST
Set the contrast (the range and default values vary according to the input signal).
BRIGHTNESS
Set the brightness (the range and default values vary according to the input signal).
RED
Set the red level.
GREEN
Set the green level.
BLUE
Set the blue level.
HUE
Set the color hue (not applicable for VGA inputs).
SATURATION
Set the color saturation (not applicable for VGA inputs).
SHARPNESS
Set the sharpness of the picture (not applicable for VGA inputs).
NOISE
REDUCTION
Select the noise reduction: OFF, LOW, MID (middle) and HIGH (not applicable for
VGA inputs).
FINETUNE
Enabled for VGA: AUTO ADJUST (NO/YES), H-POSITION, V-POSITION, PHASE,
CLOCK, WXGA/XGA, RESET (NO/YES).