![background image](http://html1.mh-extra.com/html/kramer/vm-218dtxr/vm-218dtxr_quick-start-manual_2002188001.webp)
VM-218DTxr
Quick Start
P/N:
2 9 0 0 - 3 0 0 6 2 2 QS
Rev:
4
Scan for full manual
VM-218DTxr Quick Start Guide
This guide helps you install and use your
VM-218DTxr
for the first time.
www.kramerav.com/downloads/VM-218DTxr
to download the latest user manual and check if
firmware upgrades are available.
Step 1:
Check what’s in the box
VM-218DTxr
HDMI/HDBT Switcher/DA
1 Quick start guide
1 Set of rack
ears
1 Power cord
4 Rubber feet
Step 2: Get to know your VM-218DTxr
#
Feature
Function
1
IR LED
Lights orange when the unit accepts IR remote commands.
2
IR Sensor
Use to control a peripheral device connected to OUT 2 HDBT with
that device’s remote
controller.
3
POWER LED
Lights when the unit is powered.
4
VOLUME (
)
Press to decrease the volume of the analog audio output.
5
VOLUME (
)
Press to increase the volume of the analog audio output.
6
INPUT Selector Button
Press to select input 1 HDMI
™ or input 2 HDBT.
7
INPUT LEDs
Lights green to indicate the selected input: 1 HDMI or 2 HDBT.
8
EDID READ Button
Press to read the selected EDID and write it to both inputs.
9
EDID SELECT Button
Press to cycle through the sources from which to read the EDID: Default, External, or Output.
When Output is selected, cycles through outputs 1 to 9. The relevant EDID TYPE and OUTPUT
LEDs light green.
10
EDID TYPE LEDs
Lights green to indicate the selected EDID type: DEFAULT, EXT. (external) or OUTPUT.
11
OUTPUT LEDs (1 to 9)
In normal operation mode: lights green when an acceptor is connected to the output.
In EDID mode: when EDID TYPE OUTPUT LED lights green, press the EDID SELECT button
briefly to cycle through output 1 to 9 to select the output from which to read EDID. The relevant
LED lights during EDID setup and remains lit after completing the EDID setup.
The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.