![background image](http://html.mh-extra.com/html/kramer/via-go2/via-go2_user-manual_2001849020.webp)
Kramer Electronics Ltd.
VIA GO²
– For Web Administrator: Configuring Settings – Gateway Management Pages
18
2. Click
Client Mode
.
3. Click
OK
for the notification.
The Client Mode tab appears.
Figure 14: Client Mode Tab
4. If you do not see the desired network in the dropdown, click
Click Here to Scan all
Networks
.
5. Select an available network from the drop-down.
6. Enter the network password and click
Apply
.
Figure 15: Client Mode Setting Page
7. Disconnect the LAN cable (if connected) and reboot the device.
Client Wi-Fi Mode is set up.