Kramer Electronics Ltd.
VIA GO²
– For Installer: Mounting VIA GO²
8
For Installer: Mounting VIA GO²
This section provides instructions for mounting
VIA GO²
. Before installing, verify that the
environment is within the recommended range:
•
Operation temperature
– 0
to 40
C (32 to 104
F).
•
Storage temperature
– -40
to +70
C (-40 to +158
F).
•
Humidity
– 10% to 90%, RHL non-condensing.
Caution:
•
Mount
VIA GO²
before connecting any cables or power.
•
The device is intended to be installed at a height of 2 meters or less.
Warning:
•
Ensure that the environment (e.g., maximum ambient temperature & air flow) is
compatible for the device.
•
Avoid uneven mechanical loading.
•
Appropriate consideration of equipment nameplate ratings should be used for avoiding
overloading of the circuits.
•
Reliable earthing of rack-mounted equipment should be maintained.
You can install VIA GO²
using one of the following methods:
▪
Place the device on a flat surface.
▪
Place the device on a flat surface.
▪
Mount on a wall or the back of a display using the included VESA mounting bracket:
1. Attach the VESA mounting bracket
to the back of the display with 4
screws.
2. Fasten two screws to the bottom
of
VIA GO²
.
3. Insert the screws on the
bottom of
VIA GO²
into the slots on
the mounting bracket.
When mounting the device on a display, the installer MUST secure the display to prevent
instability.
