![background image](http://html1.mh-extra.com/html/kramer/va-680d/va-680d_user-manual_2001632008.webp)
Using the VA-680D Digital Audio Delay
5
5.1 Setting the Delay Time
Set the delay time via the and + buttons
1
on the front side-panel. Delay time
is displayed (in msec) on the 7-segment display located next to these buttons.
The maximum delay time is set according to the input sampling rate, as
described in Table 2:
Table 2: Delay Time Settings According to Sampling Rate
Sampling Rate
[kHz]
Delay Time Range
[msec]
32
0 – 999
44.1
0 – 740
48
0 – 680
96
0 – 340
The delay time setting (per channel) is saved in the non-volatile memory.
5.2 Setting the Display Brightness (Dimmer Setting) Level
Use the dimmer settings to modify the brightness of the four input buttons
and the display. To set the brightness (dimmer setting) level, do the
following:
1. Press both the + and buttons continuously for 3 seconds.
The four input buttons illuminate.
The 7-segment display shows the brightness level
2
.
2. Press the + or button to increase or decrease the brightness level.
The brightness of the four input buttons and the display is adjusted
accordingly.
3. After setting the brightness, exit the dimmer setting by either:
Pressing any of the four input buttons. This button is then selected, and the
unit returns to normal operation;
OR
Waiting 20 seconds. The unit returns to normal operation
The dimmer setting is saved in the non-volatile memory.
1
in 1msec steps
2
Ranging from
1 to 100