![background image](http://html1.mh-extra.com/html/kramer/tp-45edid/tp-45edid_user-manual_2002422015.webp)
12
TP-45EDID - Connecting a Component/XGA – Audio Distribution System
2. On the
TP-45EDID
, use the SELECT buttons as follows:
Momentarily press the VIDEO SELECT button. The UXGA LED turns
off when the component video input is selected
Momentarily press the AUDIO SELECT button to toggle between the
S/PDIF and analog audio inputs
3. On the
TP-46N
, connect the following:
The Y, C
B
/P
B
,
C
R
/P
R
RCA connectors to a component video acceptor
(for example, a plasma display)
The S/PDIF
RCA connector to the digital audio acceptor (for example,
the audio input on the plasma display)
4. Connect the LINE OUTPUT RJ-45 connector on the
TP-45EDID
to the
LINE
IN RJ-45 connector on the
TP-46N
, via CAT 5 cabling, see
Figure 5
.
5. Connect the 12V DC power adapter to the power socket and connect the
adapter to the mains electricity on both the
TP-45EDID
and the
TP-46N
(not
shown in
Figure 3
).
The signal from the component video source is transmitted via the CAT 5
cable; decoded and converted to component video and outputted on the Y,
C
B
/P
B
,
C
R
/P
R
OUTPUTS RCA connectors to the component video acceptor.
6. Connect the LINE OUT RJ-45 connector on the
TP-46N
to a second
TP-46N
unit (optional).
7. If required, connect the LINE OUT RJ-45 connector on the
TP-46N
to
additional
TP-46N
units.