Electronic Component Distributor. Source::Digi International
P.N:ERT-X2-SE1-BD1 Desc:BUNDLE X2 GATEWAY GRID NOW AMR+
Web:http://www.hotenda.cn E-mail:[email protected] Phone:(+86) 075583794354
© 2012 Digi International, Inc.
Digi, Digi International, Inc., ConnectPort, iDigi, and the Digi logo are trademarks or registered trademarks of Digi International, Inc., in the United States and other countries worldwide. All other trademarks are the property of their respective owners.
The Digi Smart Grid Now AMR Plus Bundle allows you to monitor and control usage
when AMR/ERT metering systems are installed. This bundle includes a
ConnectPort® X2e SE gateway and an ERT/Smart Energy bridge that allow meter
information to be sent over your Internet connection to the iDigi® Device Cloud
service for display on your iPhone, Android, PC or other third party energy
application. This guide is intended to help you set up your system and get started.
Quick Start Guide
Smart Grid Now ERT Bundle
a
Write down the
ERT/Smart
Energy bridge Install Code:
c
Thank you for purchasing a Smart Grid Now ERT Bundle!
Verify Contents
Power Supply (2)
ERT/Smart
Energy bridge
ConnectPort X2e SE
gateway
Ethernet Cable
Step 1 -
Preparation for the Online Installation Process
NOTE:
To speed up the online installation process in Step 3, find the information for these questions below, then refer back to the answers during the online
installation.
a
Step 2 -
Set up your ConnectPort X2e SE and
ERT/Smart Energy bridge
b
c
d
01 12345678
Gas Meter
ERT
Type
ERT
ID
01 12345678
Electric Meter
ERT
Type
ERT
ID
01 12345678
Water Meter
ERT
Type
ERT
ID
ConnectPort X2e SE
ERT/Smart Energy Bridge
Write down the
ConnectPort X2e SE
Serial Number:
00409D:
ERT Type:
ERT ID:
ERT Type:
ERT ID:
ERT Type:
ERT ID:
The ERT/Smart Energy Bridge can read electric, gas, and water meters which use ERT technology. Locate any ERT-equipped meter(s) you wish to track your
energy usage on (up to 10 meters max), and write down the ERT Type and ERT ID for each meter (see examples below). Please consult with your utility
company if unsure whether a meter is equipped with ERT bubble-up technology.
TM
b
ERT/Smart Energy Bridge
Write down the
ERT/Smart
Energy bridge XBee
Serial Number:
XBee SN: ABCDEF12345678790
Model: ConnectPort X2e SE
Part Number: 50X2E-Z1C-001-01
Serial Number: 00409D50E9BB
EUI64: 0013
A200 526B 1410
Install Code:
ABCD 1234
ABCD 1234
Serial Number: XXXXXX XXXXXX
Power
ZigBee
Network
Button
Internet router
Connect the Ethernet cable.
Connect the power supply to the ConnectPort X2e SE
gateway and then plug it into a wall outlet.
Startup Sequence -
After plugging in the device the
Power and Network LEDs will gradually turn solid green.
b
a
Ethernet Setup
(continues to next page)
90001266_E
1 / 3
