![background image](http://html1.mh-extra.com/html/kramer/tp-45edid/tp-45edid_user-manual_2002422016.webp)
TP-45EDID - Connecting a Component/XGA – Audio Distribution System
13
Figure 3: Component/XGA – Audio Distribution System, Component Video Mode
5.3
Connecting the TP-45EDID Remote Control
Connect momentary push-buttons and LEDs (each LED is driven by a 5V source
and a 392Ω series resistor)
to a cable and attach the cable to a 5-pin terminal
block for connection to the
TP-45EDID
control port as shown in
Figure 4
.
Each press of the selector button toggles the audio or video system mode and
turns on or off the remote and panel status LEDs according to the active mode.