![background image](http://html1.mh-extra.com/html/kramer/summitview-sv-552/summitview-sv-552_user-manual_2000820009.webp)
Overview
5
Description
5
Connect the appropriate wiring—STP, BC-DGKat524 or
BC-DGKat-623, and BCP-2S-25—from the wall plates and the room
controller, and from the SV-552 to the speakers.
6
Install the projector and the screen. Connect the projector to the
SV-552 video outputs using the supplied video cables. Connect the
RS-232 cable between the SV-552 and the projector.
7
Turn on the SV-552 and the projector. By choosing the input
channels on the SV-552 (from the front panel buttons) and on the
projector you should be able to switch between inputs connected to
the different wall plates.
8
Load the control program on to the SV-552 via its PROGRAM port.
For additional information regarding how to program the SV-552,
refer to the separate online “K-Config Software Guide”
at
http://www.kramerelectronics.com
. You should now be able to control
the SV-552 programmed functions from the RC-63DL.