KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the SV-552 SummitView™ Processor/ Switcher
10
this information exchange is essential for proper VGA OUT operation. Using
the Kramer
Pico TOOLS
™
FC-200 EDID Copier,
you can copy the EDID
information from your display and upload it to the
SV-301xl
wall plate,
ensuring trouble-free operation of the system with any PC or Laptop.
When used in conjunction with the
SV-301
and the
SV-306
, the
SV-552
Processor/Switcher provides EDID PassThru. When used in conjunction with
the
SV-306
, the
SV-552
Processor/Switcher also provides HDCP support.
PART III Detailed Installation Instructions
PART III
covers connecting the
SV-552
, installing the Wall Plates and the Room
Controller
We recommend that after deciding where you want to install the screen and
the projector, you install in this order, the:
1. Cables and wires (see
Section 5.1
2. Room controller (see
).
Section 5
) and wall plates (see
7
Section
5 Connecting the SV-552 SummitView™ Processor/
Switcher
).
This section describes:
•
Connecting the
SV-552
(see
Section 5.1
•
Operating the
SV-552
Remotely (see
)
Section 5.2
•
Installing the
SV-552
in a 19” rack (see
)
Section 5.2
5.1 Connecting the SV-552 Processor/Switcher
)
The example in
Figure 3
shows how to connect the
SV-552.
