![background image](http://html1.mh-extra.com/html/kramer/summitview-sv-552/summitview-sv-552_user-manual_2000820029.webp)
Defining and Connecting the Wall Plates
25
7.3 Connecting the Wall Plates to the SV-552
The wall plates are connected to the corresponding inputs on the
SV-552
using the supplied
1
STP or optional
BC-DGKat524
or
BC-DGKat-623
cables (
SV-306
/
307
, see
Section 8.3
). The
SV-301xl
and the
SV-302
U.S.
versions have RJ-45 CAT 5 connectors on the rear, as defined in
Table 14
.
The
SV-301xl
and the
SV-302
European versions have terminal blocks on the
rear, as defined in
Table 11
and
Table 12
respectively.
The diagrams below show both U.S. and European versions for illustration
purposes only.
7.3.1
Connecting the SV-301xl Wall Plate to the SV-552
To connect the
SV-301xl
as the example in
Figure 7
illustrates (see also the
separate color illustration in
Section 5.1
):
Figure 7: Connecting the SV-301xl to the SV-552
1. Connect the computer graphics source (for example, a laptop) to the
Computer In 15-pin HD connector and to the unbalanced stereo Audio In
3.5mm mini jack on the front of the
SV-301xl
, for example, using a
1 There are two types of STP cable provided with SummitView™: CP-STP-50 (plenum-rated for the SummitView™ US) or
C-STP-50 (non-plenum for the SummitView™ Europe). Other STP cables can also be used. However, when using longer
STP cables, image quality may be impaired