KRAMER: SIMPLE CREATIVE TECHNOLOGY
Overview
4
However, since the use of UTP cable might not conform to electromagnetic
standards, Kramer does not commit to meeting the standard with UTP cable.
3.3 8-Step SummitView™ Basic System Quick Installation Guide
The following guide summarizes how to install a
SV-552 SummitView™
basic
system (similar principles apply if you are installing other SummitView
™
configurations).
Table 1: Quick Installation Guide for the SummitView™ Basic System
Description
1
Prepare the openings for the wall plates and the room controller.
2
Route the wiring from the proposed
location of the SV-552 via:
1. STP
1
, BC-DGKat524 or
BC-DGKat-623 (SV-306/307) cable
to the intended wall plate locations.
2. K-Net cabling to the intended
RC-63DL location.
3. Speaker cabling to the intended
location of the speakers.
4. If the SV-552 and/or the RC-63DL
are to be used as room controllers,
route the appropriate control
cables to their intended locations.
3
Install the wall plates by connecting the:
1. STP, BC-DGKat524 or BC-DGKat-623 cables to the wall plates and
installing the wall plate.
2. BCP-KNET-50 cable to the RC-63DL and installing the RC-63DL
(see
Section
10
).
4
Install the ceiling speakers.
1 There are two types of STP cable recommended with
SummitView
™: XXP-XXX (plenum-rated for the SummitView™ US) or XX-
XXX (non-plenum for the SummitView™ Europe)
