KRAMER: SIMPLE CREATIVE TECHNOLOGY
Operating the SP-10D Digital Video Processor
14
•
Store the result of the adjustment in another setup #, press the
STORE button once, select a setup # between 1 and 16 by
pressing the + and – buttons, and then press the STORE button
once again
If the adjustment is set such that the level setting is at its normal level
(“NORM”), the appropriate button no longer illuminates (otherwise this
button continues to illuminate in the main mode).
7.1
Storing and Recalling Setups
You can store and recall up to 16 setups (or adjustments) in non-volatile
memory, using the STORE and RECALL buttons together with the + and –
buttons.
To store
1
a setup, do the following:
•
Press the STORE button and then select a setup # between 1 and 16
by pressing the + and – buttons (the current settings are saved to
that setup #)
•
Press the STORE button once again
To recall a setup, do the following:
•
Press the RECALL button and then select the appropriate # (that
corresponds to the setup #) by pressing the + and – buttons (the
selected setup is recalled)
•
Press the RECALL button once again
7.2
Locking the Front Panel
To prevent changing the settings unintentionally or tampering with the front
panel, lock your
SP-10D
. Unlocking releases the protection mechanism.
To lock the
SP-10D
:
•
Press the PANEL LOCK button (for about 2 seconds) until it
illuminates — freezing the front panel controls. Pressing a button
has no effect
2
, except to cause the PANEL LOCK button to flash
3
and show the value of a ProcAmp setting if its button is pressed
4
1 Storing a new setup over a previous setup # replaces the previous setup #
2 Nevertheless, even though the front panel is locked you can still operate your PC control software
3 Warning that you need to unlock to regain control via the front panel
4 For example, if the HUE button is pressed when the panel is locked, then the 7-segment display illuminates the current
value of the HUE setting
