Kramer Electronics Ltd.
SL-280 – Remote Operation via the Web Pages
20
Teaching IR Commands
SL-280
web pages enable you to teach
SL-280
IR commands. These can be saved for later
use. The IR learning commands are in Pronto format.
While learning is in progress, the relevant
IR
LED
on the front panel lights and
SL-280
is not available for normal operation.
At the start and end of learning a message is sent to all attached clients.
To teach a command to SL-280:
1. Click
IR Command Learner
on the left side of the web page (
Figure 5
).
The IR Command Learner page appears.
Figure 15: IR Command Learner Page
2. Enter a name for the command in the first field.
3. Enter a value in the Learning timeout field.
This value defines how long the system waits to receive a command before exiting
learning mode.
4. Click
Start Learning
.
5. Position the IR remote control approximately 5cm to 7cm (2in to 2.7in) from the
SL-
280
front panel.
6. Send a command with the remote control.
The command string received during the process appears in the Command received
box.
