Kramer Electronics Ltd.
SL-280 – Remote Operation via the Web Pages
15
Configuring I/O Ports
SL-280
web pages enable you to configure each of the I/O ports
. The I/O ports control
devices such as sensors, door locks, audio volume and lighting control devices.
To configure an I/O port:
1. Click
GPIO Ports Settings
on the left side of the web page (
Figure 5
).
The GPIO Ports Settings page appears.
Figure 10: GPIO Ports Settings Page – Digital IN Trigger Type
2. In the Port area, click the number (1–8) of the port to be configured.
3. In the Settings area, select one of the following from the Trigger type option box:
•
Digital Input
(see
Configuring a Digital Input Trigger Type
on page
16
)
•
Digital Output
(see
Configuring a Digital Out Trigger Type
on page
17
)
•
Analog Input
(see
Configuring an Analog In Trigger Type
on page
18
)
The settings available on the page, change depend on which trigger type is selected.
