Kramer Electronics Ltd.
SL-280 – Remote Operation via the Web Pages
14
Configuring the Serial Ports
SL-280
web pages enable you to configure each of the serial ports
.
To configure a serial port:
1. Click
Serial Ports Setting
on the left side of the web page (
Figure 5
).
The Serial Ports Setting page appears.
Figure 9: Serial Ports Setting Page
2. In the Port area, click a port number (1–8).
3. In the Settings area, click
UDP
or
TCP
.
4. Enter the IP Port number.
5. Enter a TCP Keepalive value between 0 and 3600 seconds.
This value defines how often the unit sends a “keep alive” signal to the client. The default
value is 60 seconds.
6. Define the serial settings as necessary (see
Default Communication Parameters
on
page
27
).
7. Select whether or not to send replies on the port to a new connected client by default,
(see
Viewing Connected Clients Information
on page
11
).
8. Click
Save Changes
.
