8
RK-6PS - Mounting the Devices on the Rack Adapter
5
Mounting the Devices on the Rack Adapter
The
RK-6PS
underside includes a set of screw holes that are suitable for the
mounting of devices of different sizes (see
Section
4.1
).
To mount the devices on the
RK-6PS
, as illustrated in
Figure 1
, do the following:
1. Place the first device on the rack (for example, the Kramer
907xl
).
2. Hold both the
907xl
and the
RK-6PS
with your hands and turn them upside
down.
3. Insert and the appropriate amount of screws through the holes on the
RK-6PS
that correspond to the holes on the underside of the
907xl
, using the
M3x5 screws supplied with the device (as illustrated in
Figure 2
).
4. Tighten the screws.
5. Rotate the
RK-6PS
horizontally with the device connected.
6. Place the next device (for example, the Kramer
FC-50
) alongside the device
that is already mounted.
7. Repeat steps 2 to 6 for each other unit.