RK-6PS - Mounting the Devices on the Rack Adapter
9
9
Figure 2: RK-6PS Rack Adapter
– Underside
5.1
Mounting devices with no Underside Screw Holes
Some Kramer devices do not have screw holes on the underside that correspond
exactly to the holes on the
RK-6PS
. These devices (for example, the
FC-7501
(a
half-19") or the
VA-50P
(a 6.5” unit)) are connected via the screw holes located on
the sides of the
RK-6PS
.
To mount the devices on the
RK-6PS
as illustrated in
Figure 3
and
Figure 4
(
FC-7501
and the
VA-50P
respectively), do the following:
1. Unscrew the two M3x5 screws from the side panel of the device (for example,
the Kramer
FC-7501
or the
VA-50P
), which will be attached to the side panel
of the
RK-6PS
.
2. Place the unit on the rack (for example, the Kramer
VP-5xl
or the
VA-50P
), adjacent to the inner side panel of the
RK-6PS
.
3. Insert the two M3x8 screws (supplied with the unit) through the holes on the
side panel of the
RK-6PS
that fit the holes on the side panel of the unit (as
illustrated in
Figure 3
and
Figure 4
).
4. Tighten the screws.
