Kramer RC-3TB, User Manual

Page: 16 / 23

SL-14RC - Connecting the SL-14RC 13
6.3.1 Terminating RC-3TB Remote Control Panels
If only one RC-3TB is connected, it must be terminated and the termination on the
SL-14RC is turned off (see Section 4 ). When viewed from above and the rotary
switch is to the left of the termination switch, slide the termination switch to the left
as shown in
Figure 6 .
Only the last RC-3TB in the chain should be terminated.
6.3.2 Daisy-Chaining Multiple RC-3TB Remote Control Panels
The wiring of two RC-3TB panels to the K-NET port on the SL-14RC is shown in
Figure 6 . Connection of more than two RC-3TB panels follows the same principle.
Figure 7: Daisy-chaining Multiple RC-3TB Panels
Note the position of the termination switch on the first RC-3TB (open, to the right),
and that of the second RC-3TB (closed, to the left).
Connections to an SL-14RC or to another RC-3TB can be made to either
connector block as the connector blocks are functionally identical.