![background image](http://html1.mh-extra.com/html/kramer/rc-13tc/rc-13tc_user-manual_2000894007.webp)
RC-13TC - Defining the RC-13TC Video Transport Controller
5
Figure 2: RC-13TC Video Transport Controller Rear Panel
#
Feature
Function
4
KNET TERM
Termina ion Switch
Use to set the K-NET bus termination (see
Section 5.2.2
5
)
KNET
4-pin Removable Terminal
Blocks (
1
and
2
)
Connect to a master room controller or to another
auxiliary device.
Connect GND to GND, B to B, A to A, +12V to
+12V (see
Section 5.2
6
)
RESET (DEFAULT)
Factory
Default Reset Button
Press and hold during power-up to erase all
custom programming.
Note:
The current LCD text and all button actions
are erased
7
Ring Tongue Terminal Grounding
Screw
Connect to grounding wire (see
Section 6
8
)
RS-232
3-pin Removable
Terminal Block
For controlling a display, switcher, AV source or
other AV equipment
9
IR
Infrared 2-pin Removable
Terminal Blocks (
1
and
2
)
Connect to IR emitters (
see Figure 3
Connect OUT 1 or OUT 2 to IR+ (anode), GND to
GND (cathode)
).
10
PROGRAM (USB)
Connector
Connect to a computer to program the unit ID,
LCD text and button actions using K-Config
Configuration software
11
Power Supply 2-pin Removable
Terminal Block
Connect to power supply (see
Section 5.1.2
Connect GND to GND, +12V to +12V
).
12
FW UPGRADE
Switch
For the use of Kramer service personnel only
Summary of Contents for RC-13TC
Page 15: ......