Configuring the VP-728 via the OSD MENU Screens
29
29
8.7.1
The Slideshow Feature
The
VP-728
lets you run a slideshow via the USB input and set the slideshow
speed via the slideshow feature.
To prepare a slideshow:
1. Load the slideshow JPEG
1
2. Open the Setup menu and set the desired speed in the slideshow item and
then close the menu.
images to a USB memory stick.
The slides will appear in alphabetical order.
3. Connect the Memory stick to the USB connector on the front panel.
4. Select the USB INPUT button on the front panel.
The slideshow begins at the set speed.
You have to set the slideshow parameters before you run the slideshow
You can control the slide show by pressing the:
•
FREEZE button to pause
•
USB button to play and stop the slideshow
•
(up arrow) button to go to the previous slide
•
(down arrow) button to go to the next slide
8.7.2
The Advanced Setup Screen
Figure 16
and
Table 14
to
Table 17
(inclusive) define the Advanced Setup
screen.
Figure 16: Advanced Setup Screen
1 JPEG files are recognized up to 2048x1536