Kramer MV-6, User Manual

Page: 62 / 75

58 MV-6 - Protocol 3000 Commands
Command - OVRLTXT Command Type - Multiviewer
Command Name Permission Transparency
Set: OVRLTXT End User Public
Get OVRLTXT? End User Public
Description Syntax
Set: Set overlay text
# OVRLTXT
␠
stage,stage_id,type,size,x,y,string
␍
Get: Get overlay text
# OVRLTXT?
␠
stage,stage_id
␍
Response
~ nn@
OVRLTXT
␠
stage,stage_id,type,size,x,y,string
␍␊
Parameters
stage - input/output (see Section
‎12.4 Stage
)
stage_id - number of chosen stage (1.. max number of inputs/outputs)
type - font type (only 0 supported currently, TBD)
size - font size (see Section
‎12.8 Font Size
) for values
x - horizontal alignment (0 - Left, 1- Centered, 2- Right)
y - vertical alignment (0 - Top, 1- Centered, 2- Bottom)
string - tile text (up to 10 characters)
Response Triggers
After execution, response is sent to the com port from which the Set/Get was received
After execution, response is sent to all com ports if OVRLTXT was set by any other external control device
(button press, device menu and similar)
Notes
Command
–
SRC-BLANK
Command Type - Multiviewer
Command Name Permission Transparency
Set: SRC-BLANK End User Public
Get: SRC-BLANK? End User Public
Description Syntax
Set: Set window visibility
# SRC-BLANK
␠
win_num,enable_flag
␍
Get: Get window visibility status
# SRC-BLANK?
␠
win_num
␍
Response
~ nn@
SRC-BLANK
␠
win_num, enable_flag
␍␊
Parameters
win_num - window number to enable/disable
enable_flag - See Section
‎12.1 On/Off
Response Triggers
After execution, response is sent to the com port from which the Set/Get was received
After execution, response is sent to all com ports if SRC-BLANK was set by any other external control
device (button press, device menu and similar)
Notes