K-CONFIG –
Using the Triggers
125
8.
shows the Button 1 trigger action list:
Figure 240: Timer Events – Button 1 Action List with Timer Triggers
9.
In the same way, you can add the Stop and Start actions to each trigger.
Adding the Stop action prior to the actual executed action list, stops the System Inactivity trigger.
The Start action that follows the action sequence starts the 20 minute timer and will be active until a button will be
pressed or a trigger activated within the 20 minute period.
8.6
Query Events
Before creating a Query Event you need to define a Query via the Driver Manager (see
Section 5.3.3
), as follows:
Driver Manager > Define Query Table> accept table and exit Driver Manager> Create a query event.
To create a query event:
1.
Select
Query Events
and click the
+
icon.
The following window appears:
Figure 241: Query Events – The Query Events Window
2.
Select the
Port
and
Driver
(the driver appears automatically if defined in the port manager).
