Kramer Electronics Ltd.
FC-404NETxl
– Protocol 3000
40
Function
Description
Syntax
Parameters/Attributes
Example
NET-MASK?
Get subnet mask.
COMMAND
#NET-MASK?
<CR>
FEEDBACK
~nn@NET-MASK
net_mask
<CR><LF>
net_mask
– Format:
xxx.xxx.xxx.xxx
Get the subnet mask:
#NET-MASK?
<CR>
PASS
Set password for login
level.
The default
password is an empty
string.
COMMAND
#PASS
login_level
,
password
<CR>
FEEDBACK
~nn@PASS
login_level
,
password
<CR><LF>
login_level
– Level of login to
set (End User or Administrator).
password
– Password for the
login_level
. Up to 15 printable ASCII
chars
Set the password for the
Admin protocol permission
level to 33333:
#PASS
admin
,
33333
<CR>
PASS?
Get password for login
level.
The default
password is an empty
string.
COMMAND
#PASS?
login_level
<CR>
FEEDBACK
~nn@PASS
login_level
,
password
<CR><LF>
login_level
– Level of login to
set (End User or Administrator).
password
– Password for the
login_level
. Up to 15 printable ASCII
chars
Get the password for the
Admin protocol permission
level:
#PASS?
admin
<CR>
PORTS-
LIST?
Get the port list of this
machine.
The response is
returned in one line and
terminated
with<CR>
<LF>.
The response format
lists port IDs separated
by commas.
This is an Extended
Protocol 3000
command.
COMMAND
#PORTS-LIST?
<CR>
FEEDBACK
~nn@PORTS-LIST
[<direction_type>
.
<port_format>
.
<port_index>
,..,
]
<CR><LF>
The following attributes comprise
the port ID:
▪
<direction_type>
–
Direction of the port:
o
IN
o
OUT
▪
<port_format>
– Type of
signal on the port:
o
ANALOG_AUDIO
o
ANALOG_JACK
o
DANTE
▪
<port_index>
– The port
number as printed on the front
or rear panel
Get the ports list:
#PORTS-LIST?
<CR>
PROT-VER?
Get device protocol
version.
COMMAND
#PROT-VER?
<CR>
FEEDBACK
~nn@PROT-VER
3000:version
<CR><LF>
version
– XX.XX where X is a
decimal digit
Get the device protocol
version:
#PROT-VER?
<CR>
RESET
Reset device.
To avoid locking the
port due to a USB bug
in Windows, disconnect
USB connections
immediately after
running this command.
If the port was locked,
disconnect and
reconnect the cable to
reopen the port.
COMMAND
#RESET
<CR>
FEEDBACK
~nn@RESET
ok
<CR><LF>
Reset the device:
#RESET
<CR>
SECUR
Start/stop security.
The permission
system works only if
security is enabled with
the “SECUR”
command.
COMMAND
#SECUR
security_state
<CR>
FEEDBACK
~nn@SECUR
security_state
<CR><LF>
security_state
– Security state
0
– OFF (disables security)
1
– ON (enables security)
Enable the permission
system:
#SECUR
0
<CR>
SECUR?
Get current security
state.
The permission
system works only if
security is enabled with
the “SECUR”
command.
COMMAND
#SECUR?
<CR>
FEEDBACK
~nn@SECUR
security_state
<CR><LF>
security_state
– Security state
0
– OFF (disables security)
1
– ON (enables security)
Get current security state:
#SECUR?
<CR>
SIGNALS-
LIST?
Get signal ID list of this
machine.
The response is
returned in one line and
terminated
with<CR>
<LF>.
The response format
lists signal IDs
separated by commas.
This is an Extended
Protocol 3000
command.
COMMAND
#SIGNALS-LIST?
<CR><LF>
FEEDBACK
~nn@SIGNALS-LIST
[<direction_type>
.
<port_format>
.
<port_label>
.
<signal_type>
.
<index>
,..,
]
<CR><LF>
The following attributes comprise
the signal ID:
▪
<direction_type>
–
Direction of the port:
o
IN
– Input
o
OUT
– Output
▪
<port_format>
– Type of
signal on the port:
o
ANALOG_AUDIO
o
ANALOG_JACK
o
DANTE
▪
<port_index>
– The port
number as printed on the front
or rear panel
▪
<signal_type>
– Signal ID
attribute:
o
AUDIO
▪
<index>
– Indicates a specific
channel number when there
are multiple channels of the
same type
Get signal ID list:
#SIGNALS-LIST?
<CR>
SN?
Get device serial
number.
COMMAND
#SN?
<CR>
FEEDBACK
~nn@SN
serial_num
<CR><LF>
serial_num
– 14 decimal digits,
factory assigned
Get the device serial
number:
#SN?
<CR>
VERSION?
Get firmware version
number.
COMMAND
#VERSION?
<CR>
FEEDBACK
~nn@VERSION
firmware_version
<CR><LF>
firmware_version
–
XX.XX.XXXX where the digit groups
are: major.minor.build version
Get the device firmware
version number:
#VERSION?
<CR>