Kramer FC-4000, User Manual

Page: 8 / 12

Your Standards Converter / TBC
5
# Feature Function
9 OUTPUT R-Y BNC Connector Component video output
10 OUTPUT CV BNC Connector Composite video output
11 OUTPUT Y/C 4p Connector s-Video (Y/C) output
12 Term Hi-Z Switch Controls loop termination
1
13 GENLOCK LOOP BNC Connector GENLOCK loop
2
14 INPUT B L and R RCA Connectors Audio input
15 INPUT B CV BNC Connector Composite video input
16 INPUT B Y/C 4p Connector s-Video (Y/C) input
4.1 Connecting the Standards Converter / TBC
To connect the
FC-4000
, connect
3
the following to the rear panel ports:
Audio and video inputs and outputs
Power cord
Figure 2 illustrates how to connect the
FC-4000
:
Figure 2: FC-4000 Standards Converter / TBC Connections
1 Push down to terminate the line with 75 Ohm. Push up when the line extends to another unit
2 Connect to the GENLOCK IN connector of the next unit in the line
3 Switch OFF the power on each device before connecting it to your FC-4000. After connecting your FC-4000, switch on its
power and then switch on the power on each device